• Align the saw blade parallel to the miter slot
• Align the fence parallel to the miter slot
• Square the miter guage to the saw blade
• Check run out on arbor shaft and mounting flange
• Check run out on routers, drill press, shapers, etc

The SuperBar™ fits all standard 3/4" x 3/8" miter slots - as well as Sears (.740 slot). The SuperBar™ works with MasterPlate™ - a specially designed alignment plate. The MasterPlate™ is precision ground 6" x 10" x 1/4" thick aluminum plate with 5/8" and 1" diameter mounting holes. Substitute the MasterPlate™ for your saw blade to tune up, align and calibrate your table saw - get the maximum performance from your saw!

Dowload brochure here...

BladeKleen

Blade Kleen is recomended for removing wood and plastic buildup from the teeth and sides of your saw blades. Clean cutting edges help saw blades and other tools cut without burning. BK will clean and degrease most nonporous surfaces. It is powerfull, heavy duty, industrial liquid cleaner. In the kit it comes with brass brush. BK works best when warm (140°F). For heavy residue, use full strenght. BK can be diluted with water.

Peels Plus

Peels Plus is an advanced formula cleaner & degreaser designed to remove the toughest soils and grime without compromising the environment. Manufactured without CFC's this product will not deplete the ozon. Peels Plus removes grease, oil, tar, asphalt, wax, gums, soot, sap, and virtually all contaminants that reduce equipment life. Restores metal to its original appearance.