


















					Phone Orders and Customer Service 800.733.7111 Toll Free

FORREST DADO KING
DADO BLADE SET
for TABLE SAWS / RADIAL ARM SAWS

The World's Finest Dado Set - Clean Cuts All Your Grooves!
Of 29 dado sets tested "Only the Forrest Dado-King earned 'Superior' ratings in every category."

"No tear out on all five woods tested"
(including melamine and oak/birch plys)*
BEST OF 32 SETS TESTED!
Better Homes and Gardens Wood, Oct., 1991, p.60

Wood Magazine September 2003

Forrest Dado Set

Dado Mounting Instructions

Blade and Chipper Combinations

PLEASE NOTE:
The Dado Brochure will require that Adobe Acrobat Reader be installed on your system. Acrobat is a free program that can be downloaded here.

"Forrest Manufacturing Co. makes the only dado set with negative hook on all its teeth, including chippers. This effectively makes the teeth cut up into the wood, even when used on a table saw. It was the only set that cut the oak-veneered plywood without tear out and it also gave a perfectly flat bottom with a discreet little scribe."* Jim Puterbaugh
*See Fine Woodworking, July/August, 1991, p.59

NO SPLINTERING cross-cutting oak, ply veneers and melamine.

PERFECT FLAT-BOTTOM GROOVES not staggered steps or round bottoms like a wobble-dado leaves!

CUTS IN ALL DIRECTIONS rip, cross-cut, miter, any depth.

CUTS ALL SIZED GROOVES 1/4" through 29/32" increments.
(Set of plastic adjusting shims also included)
.
SUPER-HARD CARBIDE gives up to 300% longer life, especially good on plywoods and abrasive particle-boards.

Receive a FREE 10" Blade Runner Carrying Case ($21 value) shipped with 6", 8" or 10" Dado Sets.

DADO KING SAW BLADE SETS
ITEM #	DESCRIPTION	BORE	PRICE	BUY
DK06244	6" DADO - 29/32" WIDTH	5/8"	$275.00 $247.50	Qty:
DK08244	8" DADO - 29/32" WIDTH	5/8"	$295.00 $265.50	Qty:
DK10244	10" DADO - 29/32" WIDTH	5/8"	$355.00 $319.50	Qty:
DK10244-1	10" DADO - 29/32"" WIDTH	1"	$355.00 $319.50	Qty:
DK12244	12" DADO - 29/32" WIDTH	1"	$405.00 $364.50	Qty:

Non Standard Bore
ITEM #	DESCRIPTION	BORE	PRICE	BUY
NSB01	Non Standard Bore Size	1"	$29.00	Qty:
For bore sizes not listed contact Customer Service at 800.733.7111

SIZING:
6" Dado King fits a 8" Saw.
8" Dado King fits a 10" Saw.
10" Dado King fits a 12" Saw. (Not Recommend For 5/8" Arbor Table Saws)

Here is why this great Dado Head has no equal!
**24 #C-4 Carbide Tips on each trim saw - twice as many as most competitors.
** 4 #C-4 Carbide Tips on each chipper - also twice as many as most competitors.

Other Bores Up to 1 1/4" - $29.00 per set. Contact Customer Service.

MADE AND SERVICED IN THE U.S.A.
Previous Page

FORREST DADO KING DADO BLADE SET for TABLE SAWS / RADIAL ARM SAWS

FORREST DADO KING
DADO BLADE SET
for TABLE SAWS / RADIAL ARM SAWS