 |
There are many factors to making All Forrest Saw
Blades the premier carbide saw blade and the overwhelming choice
of professionals. Top of the list is how they are sharpened.
Having your Forrest saw blade re-sharpened by Forrest Manufacturing
Sharpening Service is what will keep it a Forrest saw blade.
Click Here for all the sharpening information
EXTRA
BONUS SHARPENING COUPONS!
3 AT $5 EACH! Buy a blade or
dado and get $15 worth of sharpening discount coupons from
Forrest, good on any make blade or dado set you own (one
per blade or dado).
|
 |
Forrest
Woodworker 1 Saw Blade For Radial and Table Saws
These trim and cross-cut ALL
PURPOSE blades give scratch-free POLISHED
cuts on wood, RIP or CROSSCUT, up to 2" thick. They have
a 30° Alternate Top Bevel with a 5° Face Hook on 10" diameters
and smaller.
(On 12" diameters and larger - 20° ATB)
|
 |
Forrest
Woodworker 2 Saw Blade For Table Saws
With this one all
purpose blade you can RIP & CROSSCUT 1" to 2" hardwood
and softwood resulting in a smooth as sanded surface.
Ply-veneers of oak and birch will crosscut with NO BOTTOM
SPLINTER at
moderate
feed rates.
Customized Forrest Woodworker
2 For Table Saws.
For the advanced table saw operator. Ideal for joinery and special
uses.
|
 |
Forrest
Chop Master Saw Blade For Chop and Miter Saws
THESE TOP QUALITY CHOP
MASTER SAW BLADES PRODUCE TIGHT, PERFECTLY CUT MITER
JOINTS WITH NO BOTTOM SPLINTERS
6-1/2" - 15" Diameter
Available.
Specially designed for sliding compound miter saws and radial
saws.
|
|
Forrest
Miter Master Saw Blades
for Double or Single Miter
Saws
THESE
PROFESIONAL QUALITY MITER SAW BLADES PRODUCE TIGHT, PERFECTLY
CUT MITER JOINTS AND CROSS CUTS WITH NO BOTTOM SPLINTERS.
- #2 Tooth Style For Aluminum
- #6 Tooth Style For Wood Only
- #7 Tooth Style For Aluminum Clad Wood
|
 |
|
 |
Forrest
No Melt Saw Blades
The Forrest NO-MELT
carbide-tipped saw blade is especially designed
for cutting single or multiple stacked sheets of plastic
without chipping or melting these materials. NO-MELT blades
are particularly suitable for acrylics, delrins, ABS
(Coycolac), styrenes, PVC, and both high and low melt nylons.
Specially engineered side clearances on the carbide teeth
significantly reduced and in many cases, totally
eliminate any formation of melted burrs of buildup of residue
on cross-sawn sections of plastic materials.
|
 |
Forrest
Duraline HI /AT Saw Blades
If
you need a blade for cutting Melamine and Plywoods perfectly,YOU
NEED *** Duraline HI A/T ***
FOR THIN VENEERS ON:
Flake board - Fire-Retardant, Laminated (1 or 2 sides), Masonite, Hard Board,
Fibre Board, etc.
PLYWOOD:
Veneered, Lumber core, Glue-ups,
Hard/Soft Woods, Chemically Impregnated, etc.
DURALINE HI-A/T ADVANTAGES:
Eliminates need for a small scoring saw blade on
table saw work. The 40° points slice through thin bottom layers with no tears
or chips. Reduced
yearly sharpening costs - Less machine downtime.
|
 |
Forrest
Solid Surface Planer Saw Blade
RECOMMENDED FOR CUTTING SOLID
SURFACE MATERIAL:
The Solid-Surface Planer carbide-tipped
saw blade is especially designed for:
Avonite®, Corian®, Fountainhead®, and other SOLID SURFACE MATERIAL
where the "Ultimate" smooth cut is desired.
|
|
Dampener For Table Saws and Radial
Saws
These important
support discs:
1. Help
kill saw scream-whistle from a vibrating blade surface.
2. Dampen
out motor and belt vibrations from being transmitted up to
the rim of the teeth.
3. Greatly
reduce cutting noise.
4. Hold
blade rigid and true for better cuts on your machine.
5. Are
hardened and precision ground flat within .001" to keep your
blade true.
6. Can
be removed instantly if need requires.
|
