Non-Ferrous Saw Blades for Cutting Copper, Aluminum and Brass

• Excellent results on table, radial, or chop saws.

• Precise burr-free cutting

• Tooth counts for light and heavy wall tubes, extrusions and plates

• Always use oil or wax lubricant when cutting non-ferrous metals. We highly recommend Castrol 15oz. Stick Wax Lubricant, Catalog # SW

• Use 60 teeth to cut metal 1/4" to 3/4" thick

• Use 80 teeth or more to cut metal 3/16" thick or less

• Clamp the workpiece to prevent kickback