The World's Finest Dado Set - Clean Cuts All Your Grooves!

Of 29 dado sets tested "Only the Forrest Dado-King earned 'Superior' ratings in every category."

"No tear out on all five woods tested"
(including melamine and oak/birch plys)*
BEST OF 32 SETS TESTED!
Better Homes and Gardens Wood, Oct., 1991, p.60

Wood Magazine September 2003

 

Dado King teeth diagram"Forrest Manufacturing Co. makes the only dado set with negative hook on all its teeth, including chippers. This effectively makes the teeth cut up into the wood, even when used on a table saw. It was the only set that cut the oak-veneered plywood without tear out and it also gave a perfectly flat bottom with a discreet little scribe."* Jim Puterbaugh

Click here to download instructions for mounting Forrest Dado Sets*See Fine Woodworking, July/August, 1991, p.59

NO SPLINTERING cross-cutting oak, ply veneers and melamine.

PERFECT FLAT-BOTTOM GROOVES not staggered steps or round bottoms like a wobble-dado leaves!

CUTS IN ALL DIRECTIONS rip, cross-cut, miter, any depth.

CUTS ALL SIZED GROOVES 1/4" through 29/32", in 1/32" increments.

(Set of plastic adjusting shims also included)

SUPER-HARD CARBIDE gives up to 300% longer life, especially good on plywoods and abrasive particle-boards.

4 #C-4 Carbide Tips on each chipper – also twice as many as most competitors.

INCLUDES A BLADE RUNNER plastic carrying case with 6, 8 and 10" Dado Sets and set of magnetic shims.

Catalog No. (Click for info) Diameter Teeth Kerf Std Bore Price  
DK0824316 8" 24 3/16" 5/8" $217.00 Add to cart
DK0824414 8" 24/4 1/4" 5/8" $237.00 Add to cart
DK06244F 6" 24/4 29/32" 30mm + 2 pinholes for Felder $397.00 Add to cart
DK06244 6" 24/4 29/32" 5/8" $307.00 Add to cart
DK08244 8" 24/4 29/32" 5/8" $327.00 Add to cart
DK10244A 10" 24/4 29/32" 5/8" $387.00 Add to cart
DK10244G 10" 24/4 29/32" 1" $387.00 Add to cart
DK12244 12" 24/4 29/32" 1" $439.00 Add to cart
DK08244F 8" 24/4 29/32" 30mm + 2 pinholes for Felder $417.00 Add to cart
$307.00
Crosscut, Miter, Grooves, Rip, 6", 29/32", 5/8", 24/4
5/8" bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth

$397.00
Crosscut, Miter, Grooves, Rip, 6", 29/32", 30mm + 2 pinholes for Felder, 24/4

30mm bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth - FOR HAMMER K3 AND 500 SERIES FELDER MACHINES ONLY!


$217.00
Crosscut, Miter, Grooves, Rip, 8", 3/16", 5/8", 24

Designed for clean-cutting 3/16" grooves in cabinet making, particularly cutting grooves for backer boards or drawer bottoms. It is comprised of two 24T outside saw blades. Includes shim set for minor adjustments due to varying plywood manufacturer thickness specs.


$237.00
Crosscut, Miter, Grooves, Rip, 8", 1/4", 5/8", 24/4

Designed for clean-cutting 3/16" to 1/4" grooves in cabinet making, particularly cutting grooves for backer boards or drawer bottoms. It is comprised of two 24T outside saw blades and one 1/16" - 4T chipper.  Includes a shim set for minor adjustments due to varying plywood manufacturer thickness specs.


$327.00
Crosscut, Miter, Grooves, Rip, 8", 29/32", 5/8", 24/4
5/8" bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth

$417.00
Crosscut, Miter, Grooves, Rip, 8", 29/32", 30mm + 2 pinholes for Felder, 24/4

30mm bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth - FOR 700 AND 900 SERIES FELDER MACHINES ONLY!


$387.00
Crosscut, Miter, Grooves, Rip, 10", 29/32", 5/8", 24/4
5/8" bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth

$387.00
Crosscut, Miter, Grooves, Rip, 10", 29/32", 1", 24/4
1" bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth

$439.00
Crosscut, Miter, Grooves, Rip, 12", 29/32", 1", 24/4
1" bore - 1/4" to 29/32" increments - No splintering and perfect flat-bottom grooves - Rip, crosscut and miter any depth
We’re Open During this Health Crisis

However, due to an unprecedented high volume of orders, you may experience shipping delays of up to 5 months. We will notify you of your expected shipping date after we process your order. This does not apply to our sharpening services. Thank you for your understanding.