Dampeners & Stiffeners for Most Table, Panel and Radial Arm Saw Blades

1. Forrest Sawblade DAMPENER helps kill saw scream-whistle from a vibrating blade surface.

2. Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth.

3. Greatly reduce cutting noise.

4. Hold blade rigid and true for better cuts on your machine.

5. Are hardened and precision ground flat within .001" to keep your blade true.

6. Can be removed instantly if need requires.

** Normally best results are obtained by selecting one stiffener 1/2 to 2/3 the sawblade diameter and mounting it against the outside of the sawblade; (a 10" blade uses a 5" stiffener).

** Be sure any bumps or scratch-burrs on used saw blades are stoned flat for dust-free metal-to-metal contact between stiffener and saw blade.

Mount with normal arbor nut and washer. Not for Chop Saws.

Dampeners & Stiffeners for Most Table, Panel and Radial Arm Saw Blades

$32.00
4", 1-1/8", 3/4", 1", 32MM, 5/8", 20mm, 30mm, 1-1/4"
Dampeners-Stiffeners provide a smoother, quieter cut.

$34.00
5", 1", 32MM, 5/8", 20mm, 30mm, 1-1/4", 1-1/8", 3/4"
Dampeners-Stiffeners provide a smoother, quieter cut.

$36.00
6", 1", 32MM, 5/8", 20mm, 30mm, 1-1/4", 1-1/8", 3/4"
Dampeners-Stiffeners provide a smoother, quieter cut.

$38.00
7", 1", 32MM, 5/8", 20mm, 30mm, 1-1/4", 1-1/8", 3/4"
Dampeners-Stiffeners provide a smoother, quieter cut.

$40.00
8", 1", 30mm, 1-1/4", 1-1/8", 32MM
Dampeners-Stiffeners provide a smoother, quieter cut.

$42.00
9", 1", 30mm, 1-1/4", 1-1/8", 32MM
Dampeners-Stiffeners provide a smoother, quieter cut.

$44.00
10", 1", 30mm, 1-1/4", 1-1/8", 32MM
Dampeners-Stiffeners provide a smoother, quieter cut.
We’re Open During this Health Crisis

However, due to an unprecedented high volume of orders, you may experience shipping delays of up to 5 months. We will notify you of your expected shipping date after we process your order. This does not apply to our sharpening services. Thank you for your understanding.